17-9. M1084/M1086 MATERIAL HANDLING CRANE (MHC) TUBING REPLACEMENT
This task covers:
a. Hydraulic Tubing Locations
b. Follow-On Maintenance
MHC positioned over cargo bed (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
a. Hydraulic Tubing Locations.
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that
come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing
should be removed immediately. Areas in which lubricating oil is used should be well ventilated
to keep fumes to a minimum. Failure to comply may result in injury to personnel.
Cap or plug tubes and connection points to prevent contamination of M1084/M1086 MHC hydraulic
system. Failure to comply may result in damage to equipment.
Refer to Table 17-2. M1084/M1086 Material Handling Crane (MHC) Hydraulic Tubing Locations for
tubing locations on the M1084/M1086 MHC. It may not be necessary to remove all hydraulic tubes at one
Tag tubes and connection points prior to removal.
Remove plastic cable ties as required.
Remove clamps and support brackets as required.
Position drain pan to collect oil.