TM 9-2320-366-20-4
15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR (CONT)
(2) Remove self-locking nut (2), bolt (3), and bracket
assembly (4) from frame bracket (5). Discard self-
locking nut.
(3) Remove self-locking nut (6) and bolt (7) from axle
bracket (8). Discard self-locking nut.
WARNING
Rear stabilizer bar weighs approximately
50 lbs (22 kgs). Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or
damage to equipment.
(4) Perform steps (2) and (3) on left side of rear stabilizer
bar.
NOTE
Step (5) requires the aid of an assistant.
(5) Remove rear stabilizer bar (1) from vehicle.