TM 9-2320-366-20-4
NOTE
Step (8) requires the aid of an assistant.
(8) Position catwalk (6) on 30K winch frame (3) with
three screws (11) and self-locking nuts (12).
(9) Install rod (13) on 30K winch frame (3).
(10) Position three screws (14) in hinge (8) with three
self-locking nuts (15).
(11) Tighten three self-locking nuts (12 and 15) to 20-25
lb-ft (27-34 Nm).
(12) Close catwalk (6).
c. Center Catwalk Removal.
(1) Remove four self-locking nuts (1), washers (2),
screws (3), catwalk (4), and four mounts (5) from
vehicle. Discard self-locking nuts.
Change 2