TM 9-2320-366-20-4
11-28. FRONT GLADHAND ONE-WAY CHECK VALVE REPLACEMENT (CONT)
b. Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of 90-degree fitting
(1).
(2) Install 90-degree fitting (1) in fitting (2).
(3) Apply antiseize compound to threads of adapter (3) and
fitting (4).
(4) Install adapter (3) and fitting (4) in one-way check valve
(5).
NOTE
Install plastic cable ties as required.
(5) Install fitting (2) on bracket (6) with lockwasher (7) and
nut (8).
(6) Install tee fitting (9) in fitting (2).
(7) Apply antiseize compound to threads of 90-degree fitting
(10) and one-way check valve (5).
(8) Install 90-degree fitting (10) and one-way check valve (5)
in tee fitting (9).
11-168