TM 9-2320-366-20-4
11-22. SECONDARY AND PRIMARY AIR TANKS REPLACEMENT (CONT)
b. Secondary Air Tank Installation (All Models Except
M1088/M1089).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of 90-degree
fittings (1 and 2), and threads on both sides of reducer
fitting (3).
(2) Install 90-degree fittings (1 and 2) in inversion valve (4).
(3) Install reducer fitting (3) in two-way check valve (5).
(4) Install inversion valve (4) on reducer fitting (3).
(5) Apply antiseize compound to threads of drain valve (6).
(6) Install drain valve (6) in secondary air tank (7).
11-138