TM 9-2320-366-20-4
11-10. LOAD SENSING VALVE AND CONTROL CABLE REPLACEMENT/ADJUSTMENT
(CONT)
NOTE
Tag air hoses and connection points prior to
disconnecting.
(4) Disconnect air hose (5) from load sensing valve (6).
NOTE
Perform step (5) on all models except M1088
and M1089.
(5) Disconnect air hoses (7 and 8) from load sensing valve
(6).
NOTE
Perform step (6) on M1088 and M1089.
(6) Disconnect air hose (9) from load sensing valve (6).
NOTE
Perform step (7) on all models except
M1088.
(7) Remove two self-locking nuts (10), screws (11), four
spacers (12), load sensing valve (6), bracket (12) and
spacer (13) from crossmember (14). Discard self-locking
nuts.
11-60
Change 1