TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Cab raised (TM 9-2320-366-10-1).
Air tanks drained (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Tools and Special Tools
a. Removal.
NOTE
Perform step (1) on vehicle serial number 7448
and higher and vehicle serial numbers 0001
through 7447 that have previously had front
lights cable assembly replaced.
Tag wires and connection points prior to
removal.
(1) Remove adhesive and boot (1) from low pressure
(2) Remove adhesive, two nuts (3), lockwashers (4), and
terminal lugs TL201 (5) and TL202 (6) from low pressure
bushing (7).
Change 1