TM 9-2320-366-20-4
7-135. WINCH CONTROL VALVE CABLE ASSEMBLY REPLACEMENT (CONT)
NOTE
Other hoses, cable assemblies, and terminal
lugs are installed with clamps and winch control
valve cable assembly.
Steps (7) and (8) require the aid of an assistant.
(7) Position three clamps (11) on winch control valve cable
assembly (1).
(8) Install winch control valve cable assembly (1) on right
frame rail (6) with three clamps (11), screws (12), and
self-locking nuts (13).
(9) Position clamp (14) on winch control valve cable
assembly (1).
(10) Install terminal lug TL320 (15) on screw (16).
(11) DELETED
(12) Install terminal lug TL111 (17) on screw (16).
(13) Position terminal lug TL83 (18) and clamp (14) on screw
(16) with self-locking nut (19).
(14) Tighten self-locking nut (19) to 97-120 lb-in. (11-14 Nm).
7-668
Change 1