TM 9-2320-366-20-4
(10) Remove self-locking nut (19), clamp (20), and terminal
lugs TL83 (21), and TL111 (22) from screw (23).
Discard self-locking nut.
NOTE
Perform steps (11) through (13) on vehicles
equipped with self-recovery winch.
(11) Remove terminal lug TL320 (24) from screw (23).
(12) Disconnect connector clamp (25) from connector P215
(26).
(13) Disconnect connector P215 (26) from connector J215
(27)
(14) Remove PTO cable assembly (12) from clamp (20).
(15) Remove self-locking nut (28), clamp (29), and screw (30)
from frame rail (31). Discard self-locking nut.
(16) Remove PTO cable assembly (12) from clamp (29).
(17) Remove self-locking nut (32), clamp (33), screw (34),
and clamp (35) from frame rail (31). Discard self-locking
nut.
(18) Remove PTO cable assembly (12) from clamp (33).
7-623