TM 9-2320-366-20-4
7-110. M1089 CRANE POWER CABLE REPLACEMENT (CONT)
(8) Install quick disconnect terminal (6) on ground strip (14)
position 3.
(9) Install terminal lugs (8, 10, and 12) on terminal block
(15) positions 2, 3, and 4 with three screws (16).
(10) Apply varnish to quick disconnect terminal (6) and
terminal lugs (8, 10, and 12).
(11) Close cover (17) on junction box (18).
(12) Tighten four screws (19) on junction box (18).
(13) Install black wire (20) on terminal block (21) position 7A
with screw (22).
(14) Install green wire (23) and shield (24) on terminal block
(21) position C with screw (22).
7-556