TM 9-2320-366-20-4
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove three screws (6), from terminal blocks (7 and 8)
positions 6, 25, and 28.
(5) Disconnect quick disconnect terminal (9) from ground
strip (10) position 8.
(6) Remove quick disconnect terminal (9) from green wire
(11).
(7) Remove terminal lugs (12, 13, and 14) from black wire
(15), red wire (16), and white wire (17).
(8) Loosen nut (18) on clamp (19).
(9) Loosen two screws (20) on clamp (21).
(10) Remove compression nut (22) from connector (23).
(11) Remove overload lockout cable (24) from connector (23),
compression nut (22), and clamp (21).
(12) Remove overload lockout cable (24) from clamp (19).
7-471