TM 9-2320-366-20-4
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove screw (6) from terminal block (7) position 23.
(5) Disconnect quick disconnect terminal (8) from ground
strip (9) position 11.
(6) Remove quick disconnect terminal (8) from black wire
(10).
(7) Remove terminal lug (11) from white wire (12).
(8) Loosen nut (13) on clamp (14).
(9) Remove compression nut (15) and washer (16) from
connector (17).
(10) Remove hoist up solenoid cable (18) from connector
(17), washer (16), and compression nut (15).
(11) Remove hoist up solenoid cable (18) from clamp (14).
7-463