TM 9-2320-366-20-4
7-82. FRONT LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT)
(7) Install terminal lugs TL202 (25) and TL201 (26) on low
nuts (29).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(8) Apply adhesive to terminal lugs TL202 (25) and TL201
(8.1) Install boot (27.1) on low pressure transmitter (27).
(8.2) Apply antiseize to holes TLR and TTR and around edges
of boot (27.1).
(9) Connect connector J52 (30) to P52F (31).
Change 1