TM 9-2320-366-20-4
7-80. ENGINE CONTROL CABLE ASSEMBLY REPLACEMENT (CONT)
(35) Remove two self-locking nuts (67), screws (68), and
clamps (69) from brackets (70 and 71). Discard
self-locking nuts.
(36) Remove two clamps (69) from engine control cable
assembly (53).
(37) Remove self-locking nut (72), screw (73), and clamp (74)
from left frame rail (75).
(38) Remove clamp (74) from engine control cable assembly
(53).
(39) Remove engine control cable assembly (53) from
vehicle.
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Position engine control cable assembly (1) in vehicle.
(2) Install clamp (2) on engine control cable assembly (1).
(3) Install clamp (2) on left frame rail (3) with screw (4) and
self-locking nut (5).
7-370