TM 9-2320-272-24-3
THIS TASK COVERS:
b. Installation
a Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M936/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Torque wrench (Appendix E, Item 144)
Parking brake set (TM 9-2320-272-10)
Lifting device
Chains
Floodlight assembly removed (para. 3-121).
MATERIALS/PARTS
GENERAL SAFETY INSTRUCTIONS
Three locknuts (Appendix D, Item 291)
All personnel must stand clear during lifting
Twelve locknuts (Appendix D, Item 285)
operations.
WARNING
All personnel must stand clear during lifting operations.
A snapped cable, or shifting or swinging load, may cause injury
to personnel.
1.
Remove hydraulic tube (2) from elevating cylinder crossover tee (8) and control valve flex line (3).
NOTE
Tag all lines for installation.
2.
Remove three locknuts (6), clamps (5), and six hydraulic flex lines (7) from gondola (1). Discard
locknuts (6).
3.
Remove hydraulic swivel valve flex line (4) from gondola (1).
4.
Remove gondola guard (9) from gondola (1).
5.
Attach two utility chains to gondola (1).
6.
Attach hoist hook to utility chains and remove slack.
CAUTION
Ensure all hydraulic lines and wires are fastened clear of gondola
to avoid snagging during removal.
NOTE
Assistant will help with step 7.
7.
Remove twelve locknuts (11) and screws (12) from turntable side plate (10) and lift gondola (1) away
from side plate (10). Discard locknuts (11).
8.
Remove lifting device and two utility chains from gondola (1).
4-942