TM 9-2320-272-24-3
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
PERSONNEL REQUIRED
APPLICABLE MODELS
TWO
M936/A1/A2
REFERENCES (TM)
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
LO 9-2320-272-12
TM 9-2320-272-10
Torque wrench (Appendix E, Item 144)
TM 9-2320-272-24P
MATERIALS/PARTS
EQUIPMENT CONDITION
Cotter pin (Appendix D, Item 81)
Parking brake set (TM 9-2320-272-10).
Four locknuts (Appendix D, Item 294)
Six lockwashers (Appendix D, Item 392)
Two O-rings (Appendix D, Item 560)
O-ring (Appendix D, Item 477)
O-ring (Appendix D, Item 456)
Five lockwashers (Appendix D, Item 354)
Adhesive sealant (Appendix C, Item 4)
Antiseize tape (Appendix C, Item 72)
Remove five screws (4), lockwashers (5), washers (6), and cover (3) from floor plate (15). Discard
1.
lockwashers (5).
Remove four screws (2), washers (1), and floor plate (15) from frame (7).
2.
Remove two locknuts (8), screws (11), and washers (10) from front bracket (9) and frame (7). Discard
3.
locknuts (8).
NOTE
Have drainage container ready to catch oil.
4.
Disconnect hose connector (16) from elbow (21).
Remove elbow (21), adapter (20), and valve (19) from elbow (18). Tag adapter (20) and valve (19) for
5.
installation.
Rotate elbow (18) upward on pipe nipple (17) to allow removal of front bracket (9).
6.
Remove three screws (12), lockwashers (13), and front bracket (9) from winch motor (14).
7.
4-888