TM 9-2320-272-24-3
5.
Remove six screws (21) and shift panel cover (22) from shift panel (14).
6.
Remove cotter pin (26), clevis pin (23), washer (24), and cable clevis (25) from lever (13). Discard
cotter pin (26).
7.
Remove cotter pin (15), pin (12), washer (27), and lever (13) from shift panel (14). Discard cotter pin (15).
8.
Remove two nuts (16), screws (20), clamp (19), shim (18), and cable (11) from vehicle.
NOTE
Grommet may remain on cable during removal. Transfer grommet
to new cable.
NOTE
Install tiedown straps as required.
1.
Install lever (13) in shift panel (14) with washer (27), pin (12), and new cotter pin (15). Bend ends of
cotter pin (15).
2.
Ensure grommet (17) is positioned in firewall, and install cable clevis (25) on lever (13) with
washer (24), clevis pin (23), and new cotter pin (26). Bend ends of cotter pin (26).
3.
Install shim (18) and cable (11) on shift panel (14) with two screws (20) and nuts (16).
4.
Install shift panel cover (22) on shift panel (14) with six screws (21).
4-851