TM 9-2320-272-24-3
NOTE
Ensure all bearings are packed with GAA grease before
installation.
Using arbor press, install bearing (11) in sheave (12).
1.
2.
Using soft-faced hammer, drive pin (16) into tensioner sheave pin (14) until seated.
Install snapring (15) on pin (14).
3.
Position felt side of two new felt washers (10) against bearing (11).
4.
Position sheave (12) and two thrust washers (9) in frame (2) and install with tensioner sheave pin (14).
5.
Secure tensioner sheave pin (14) on frame (2) with snapring (15). Ensure tensioner sheave pin (14)
6.
engages slot (17) in frame (2).
4-829