TM 9-2320-272-24-3
THIS TASK COVERS:
d. Assembly
a. Removal
e. Installation
b. Disassembly
c. Cleaning and Inspection
INITIAL SETUP:
MATERIALS/PARTS
APPLICABLE MODELS
M936/A1/A2
TOOLS
Four felt washers (Appendix D, Item 113)
Woodruff key (Appendix D, Item 732)
General mechanic's tool kit (Appendix E, Item 1)
GAA grease (Appendix C, Item 28)
Arbor press
Cleaning rags (Appendix C, Item 58)
Soft-faced hammer
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
Winch cable removed (para. 3-325).
Remove four nuts (2). lockwashers (3), screws (4), and cable tensioner (8) from brackets of roller assembly (1).
Discard lockwashers (3).
Remove
two grease fittings (9) from cable tensioner (8).
1.
2.
Remove
setscrew (6), lever (5), and poppet assembly (7) from tensioner (8).
3.
Remove
latch nut (14), latch (10), and winch poppet nut (13) from poppet (12).
4.
Remove
spring (11) and poppet (12) from poppet nut (13).
4-825