TM 9-2320-272-24-3
4-154. REAR DOOR MAINTENANCE
THIS TASK COVERS:
d. Assembly
a. R e m o v a l
e. Installation
b. D i s a s s e m b l y
c. Cleaning and Inspection
INITIAL SETUP:
PERSONNEL REQUIRED
APPLICABLE MODELS
Two
M934/A1/A2
MANUAL REFERENCES (TM)
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
LO 9-2320-272-12
TM 9-2320-272-10
MATERIALS/PARTS
TM 9-2320-272-24P
TM 43-0213
Four locknuts (Appendix D, Item 272)
EQUIPMENT CONDITION
Six lockwashers (Appendix D, Item 400)
Gasket (Appendix D, Item 229)
l Parking brake set (TM 9-2320-272-10).
l Ladder-removed (TM 9-2320-272-10).
Seven rivets (Appendix D, Item 542)
l Rear door window removed (para. 3-350).
Weatherseal (Appendix D, Item 718)
Seal (Appendix D, Item 605)
SPECIAL ENVIRONMENTAL CONDITIONS
Three rivets (Appendix D, Item 545)
Vehicle must be on a level surface.
Sealing compound (Appendix C, Item 15)
Adhesive (Appendix C, Item 7)
NOTE
Left and right doors are maintained basically the same way. This
procedure covers the left door except where otherwise indicated.
a. Removal
Remove two screws (5), lockwashers (6), strike (7), and door check (1) from door (4). Discard
1.
lockwashers (6).
Remove fifteen screws (3) and door (4) from van body (2).
2.
b. Disassembly
Remove two screws (13) and angle bracket (12) from outer panel (11).
1.
Remove four screws (14), lockwashers (15), and clamp (16) from outer panel (11). Discard
2.
lockwashers (15).
Remove four screws (18), two screws (8), washers (9), bushings (10), locknuts (17), and rack (19)
3.
from outer panel (11). Discard locknuts (17).
4-756