TM 9-2320-272-24-3
4-138. CAB WINDSHIELD REPAIR
THIS TASK COVERS:
a. Disassembly
b. Assembly
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Windshield removed (para. 3-278).
Four filler strips (Appendix D, Item 127)
GENERAL SAFETY INSTRUCTIONS
Four lockwashers (Appendix D, Item 391)
Eyeshields required when replacing windshield
Four lockwashers (Appendix D, Item 389)
glass.
WARNING
Use eyeshields when replacing windshield glass. Glass could
shatter, causing injury to personnel.
a. Disassembly
1.
Remove two capnuts (3), lockwashers (4), screws (5), and crosspiece (2) from frame (8). Discard
lockwashers (4).
2.
Remove filler strip (1) from crosspiece (2). Discard filler strip (1).
3.
Remove four screws (7) and lockwashers (6) from frame (8). Discard lockwashers (6).
4.
Remove two capnuts (14), lockwashers (13), screws (11), and locking latch (12) from frame (8).
Discard lockwashers (13).
5.
Remove glass (9) and three filler strips (10) from frame (8). Discard filler strips (10).
b. Assembly
1.
Position new frame filler strip (10) around glass (9).
2.
Install glass (9) with frame filler strip (10) in frame (8).
3.
Install new crosspiece filler strip (1) over glass (9).
4.
Install crosspiece (2) on glass (9) and tap into position until screw holes are aligned with holes in
frame (8).
CAUTION
Do not overtighten crosspiece or windshield frame screws. Glass
could be damaged.
5.
Secure crosspiece (2) on frame (8) with two screws (5), new lockwashers (4), and capnuts (3).
6.
Install four new lockwashers (6) and screws (7) on frame (8).
7.
Install locking latch (12) on frame (8) with two screws (11), new lockwashers (13), and capnuts (14).
8.
Trim crosspiece filler strip (1) and frame filler strip (10) even with frame (8) and crosspiece (2)
edges.
4-708