TM 9-2320-272-24-3
4-119. STEERING GEAR (ROSS) REPAIR (Contd)
Remove
jamnut (5) and wormshaft adjusting screw (6) from end cover (2).
12.
Remove
jamnut (7) and poppet adjusting screw (8) from end cover (2).
13.
Remove
four screws (4) and washers (3) from end cover (2).
14.
Remove
end cover (2) and O-ring (9) from gear housing (1). Discard O-ring (9).
15.
Remove
four screws (11) from valve housing (10) and gear housing (1).
16.
CAUTION
Alignment marks are located on valve sleeve and wormshaft so
they can be assembled in their original position. Failure to align
marks may cause damage to steering gear.
Remove valve housing (10) from gear housing (1), observing alignment marks (13) in valve housing (10)
17.
and on wormshaft (12).
4-626