TM 9-2320-272-24-3
4-68. REAR WIRING HARNESS REPLACEMENT (Contd)
NOTE
Steps 20 through 22 apply to M931/A1/A2 and M932/A1/A2
vehicles only.
20.
Remove two nuts (10), screws (1), and clamps (11) from frame rail (2).
21.
Disconnect harness connector (8) from semitrailer receptacle (6).
22.
Remove two nuts (9), ground wires (7) and (3), two lockwashers (4), and screws (5) from semitrailer
NOTE
Tag clamps for installation.
l
l Refer to table 4-9 for number of harness clamps installed on
each vehicle.
23.
Remove nut (15), screw (13), and harness clamp (14) from wiring harness (12)
M931/A1/A2 AND M932/A1/A2 VEHICLES
4-452