TM 9-2320-272-24-3
4-67. FRONT WIRING HARNESS (M939A2) REPLACEMENT (Contd)
42.
Disconnect
front harness connector (2) from turn signal control (1).
Disconnect
wire (4) from horn switch (3).
43.
44.
Disconnect
two wires (5) from electrical gauge circuit breaker (8).
45.
Disconnect
two wires (6) from heater blower motor circuit breaker (7).
46.
Disconnect
NOTE
Perform step 47 for M936A2 vehicles only.
47.
Disconnect wire (11) from warning signal lamp switch (12).
48.
Disconnect three wires (17) from heater blower motor switch (18).
49.
Disconnect two wires (19) from ether start switch wires (20).
50.
Disconnect wire (13) from CTIS blackout connector (14).
51.
Disconnect CTIS power supply connector (16) from CTIS wiring harness connecter (15).
4-428