TM 9-2320-272-24-3
4-66. FRONT WIRING HARNESS (M939/A1) REPLACEMENT (Contd)
Place transmission selector assembly (1) in N (neutral) position.
77.
Remove four screws (3), lockwashers (4), and transmission selector assembly (1) from console (2).
78.
Disconnect transmission selector wires (5), (6), and (7) from three harness leads (8).
79.
NOTE
Perform step 80 for M936 vehicles only.
Disconnect connector (9) from connector (10) and from floodlight switch (25) and auxiliary
80.
receptacle (26).
Remove cap (17) from connector (22).
81.
Remove nut (13), lockwasher (14), screw (19), and ground wire (15) from mounting bracket (21).
82.
Discard lockwasher (14).
Remove nut (11), lockwasher (12), screw (18), and cap chain (16) from mounting bracket (21).
83.
Discard lockwasher (12).
Remove two nuts (24), lockwashers (23), screws (20), and connector (22) from three mounting
84.
brackets (21). Discard lockwashers (23).
4-406