TM 9-2320-272-24-2
4-13. ENGINE ACCESS COVER REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INlTIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
LO 9-2320-272-12
M939/A1
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
l Parking brake set (TM 9-2320-272-10).
l Right splash shield removed (TM 9-2320-272-10).
Engine access cover gasket (Appendix D,
l Engine oil drained (LO 9-2320-272-12).
Item 167)
Four lockwashers (Appendix D, Item 416)
a. Removal
Remove two screws (9), lockwashers (10), washers (8), and clamps (11) from engine access cover (2)
1.
and move transmission cooler lines (7) to one side. Discard lockwashers (10).
2.
Remove two screws (4), lockwashers (5), washers (3), engine access cover (2), and gasket (1) from
cylinder block (6). Discard lockwashers (5) and gasket (1).
b. Installation
1.
Install new gasket (1) and engine access cover (2) on cylinder block (6) with two washers (3), new
lockwashers (5), and screws (4).
2.
Install transmission cooler lines (7) on engine access cover (2) with two clamps (11), washers (8),
4-124