TM 9-2320-272-24-2
3-426. 100-AMP ALTERNATOR REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured (TM 9-2320-272-10).
Left and right splash shields removed
Lockwasher (Appendix D, Item 354)
(TM 9-2320-272-10).
Battery ground cables disconnected (para. 3-126).
Alternator drivebelts removed (para. 3-78).
a. Removal
1.
Disconnect harness connector (12) from alternator (11).
2.
Remove two nuts (9), washers (8), and screws (7) from alternator (11) and mounting bracket (10).
NOTE
3.
Remove screw (l), washers (4) and (3), lockwasher (2), and alternator (11) from adjusting arm (5).
Discard lockwasher (2).
4.
Remove alternator pulley (6) from alternator (11) (para. 3-73).
1.
Install alternator pulley (6) on alternator (11) (para. 3-73).
NOTE
2.
Install alternator (11) on adjusting arm (5) with new lockwasher (2), washers (3) and (4), and
screw (1).
3.
Install alternator (11) on mounting bracket (10) with two screws (7), washers (8), and nuts (9).
4.
Connect harness connector (12) to alternator (11).
3-1094