TM 9-2320-272-24-2
3-278. WINDSHIELD AND OUTER FRAME ASSEMBLY REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Cab top removed from windshield
Six lockwashers (Appendix D, Item 389)
(TM 9-2320-272-10)
Two lockwashers (Appendix D, Item 369)
Wiper blade, wiper motor, and wiper arm removed
NOTE
Perform steps 1 and 2 only on vehicles with hard top kit.
1.
Remove two screws (3) and lockwashers (2) from roof (7) and corner post (5). Discard lockwashers (2).
2.
Remove four nuts (1) and hook bolts (4) from roof (7) and windshield frame (6).
3.
Remove hose clamp (9) and wiper hose (8) from copper air line (10).
4.
Remove six screws (13) and lockwashers (14) from two windshield hinges (11) and windshield frame (6).
Discard lockwashers (14).
5.
Remove windshield frame (6) from two windshield hinges (11).
1.
With doors (12) opened, align windshield frame (6) on two windshield hinges (11) and install with
six new lockwashers (14) and screws (13).
2.
Install wiper hose (8) on copper air line (10) with hose clamp (9).
NOTE
Perform steps 3 and 4 on vehicles with hardtop kit.
3.
Install roof (7) on windshield frame (6) with four hook bolts (4) and nuts (1).
4.
Install roof (7) on comer post (5) with two new lockwashers (2) and screws (3).
3-752