TM 9-2320-272-24-1
NOTE
Fittings must be cleaned and inspected for cracks and stripped
threads.
Wrap all male pipe threads with antiseize tape before
installation.
Install adapter (4) and identification plate (20) in frame rail (5) with new lockwasher (19) and nut (18).
1.
Do not tighten nut (18).
NOTE
Perform steps 2 and 3 for service coupling on left side of vehicle.
Install pipe coupling (17) on adapter (4).
2.
Install elbow (16) on pipe coupling (17).
3.
Install valve (12) and pipe nipple (7) on elbow (16).
4.
5.
Install plate (13) and bracket (11) on frame rail (5) with four screws (6), washers (14), and new
locknuts (15).
NOTE
Perform step 6 for emergency coupling on right side of vehicle.
6.
Tighten nut (18).
7.
Install pipe coupling (3) on adapter (4).
8.
Install elbow (2) in pipe coupling (3).
9.
Connect air line (1) to elbow (2).
10.
Install air coupling (10) on pipe nipple (7).
Install dummy coupling (9) and S-hook (8) on air coupling (10) and bracket (11).
11.
3-592
