TM 9-2320-272-24-1
3-118. FRONT AND REAR COMPOSITE LIGHT AND BRACKET REPLACEMENT (Contd)
NOTE
l Left and right composite lights, brackets, covers, and braces are
replaced the same way.
l Tag wires for installation.
1.
Remove four screws (6) and cover (5) from bracket (9)
2.
Disconnect four connectors (8) from wires (10).
3.
Remove two screw-assembled lockwashers (4) and rear composite light (11) from bracket (9).
Discard screw-assembled lockwashers (4).
4.
Remove locknuts (14) and (7), two screws (3), and bracket (9) from brace (2). Discard locknuts (14)
and (7).
5.
Remove two nuts (12), screws (13), and brace (2) from frame rail (1).
1.
Install brace (2) on frame rail (1) with two screws (13) and nuts (12).
2.
Install bracket (9) on brace (2) with two screws (3) and new locknuts (14) and (7).
3.
Install rear composite light (11) on bracket (9) with two new screw-assembled lockwashers (4).
4.
Connect four connectors (8) to wires (10).
5.
Install cover (5) on bracket (9) with four screws (6).
3-318
