TM 9-2320-272-24-1
3-118. FRONT AND REAR COMPOSITE LIGHT AND BRACKET REPLACEMENT
THIS TASK COVERS:
h. Installation (M929/A1/A2)
a. Front Composite Light Removal
i. Removal (M931/A1/A2)
b. Front Composite Light Installation
j. Installation (M931/A1/A2)
c. Removal (M923/A1/A2)
k. Removal (M934/A1/A2)
d. Installation (M923/A1/A2)
L. Installation (M934/A1/A2)
e. Removal (M936/A1/A2)
m. Composite Light Lamp Removal
f. Installation (M936/A1/A2)
n. Composite Light Lamp Installation
g. Removal (M929/A1/A2)
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
l Battery ground cables disconnected (para. 3-126).
Two lockwashers (Appendix D, Item 356)
Four locknuts (Appendix D, Item 299)
Four lockwashers (M936/A1/A2)
(Appendix D, Item 345)
Two locknuts (M936/A1/A2) (Appendix D,
Item 291)
Three locknuts (M929/A1/A2) (Appendix D,
Item 313)
Two locknuts (M931/A1/A2) (Appendix D,
Item 322)
Locknut (M931/A1/A2) (Appendix D, Item 288)
Four locknuts (M931/A1/A2)
(Appendix D, Item 313)
Two locknuts (M934/A1/A2) (Appendix D,
Item 288)
Two screw-assembled lockwashers
(Appendix D, Item 583)
a. Front Composite Light Removal
1.
Remove four locknuts (13) and screws (5) from fender (3). Discard locknuts (13).
NOTE
Tag wires for installation.
2.
Disconnect wires (7), (8), (9), and (10).
3.
Remove wiring cover (11) from cable (12).
4.
Remove grommet (14) from fender (3).
5.
Remove two screws (1), lockwasher (2), and front composite light (6) from fender (3). Discard
lockwasher (2).
6.
Remove locknut (19), two washers (17) and lockwashers (15), screw (16), and mounting bracket (4)
from fender (3). Discard lockwashers (15) and locknut (19).
3-310
