• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
OIL PRESSURE SENDING UNIT REPLACEMENT cont'd
FUEL LEVEL SENDING UNIT REPLACEMENT cont'd

TM-9-2320-272-24-1 Truck 5-Ton 6x6 M939 M939A1 M939A2 Series Trucks (Diesel) Manual
Page Navigation
  610    611    612    613    614  615  616    617    618    619    620  
TM 9-2320-272-24-1
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-272-10).
All
Spare tire carrier access step removed (M931/A1/A2
TOOLS
and M932/A1/A2) (para. 3-260).
Battery ground cables disconnected (para. 3-126).
General mechanic's tool kit (Appendix E, Item 1)
MATERIALS/PARTS
GENERAL SAFETY INSTRUCTIONS
Do not perform this task near open flame.
Casket (Appendix D, Item 143)
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near open flame. Injury to personnel may result.
1.
Disconnect wire (2) from sending unit (3).
2.
Remove five screws (1) and ground wire (6) from sending unit (3) and fuel tank (5).
3.
Remove sending unit (3) and gasket (4) from fuel tank (5). Discard gasket (4).
1.
Install new gasket (4), sending unit (3), and ground wire (6) on fuel tank (5) with five screws (1).
2.
Connect wire (2) to sending unit (3).
3-264






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.