TM 9-2320-272-24-1
THIS TASK COVERS:
a. Removal
c. Installation
b. Inspection
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Torque wrench (Appendix E, Item 144)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Five tiedown straps (Appendix D, Item 690)
GAA grease (Appendix C, Item 28)
1.
Remove screw (5), washer (4), two clamps (2), speedometer driveshaft (6), and clamp (3) from air
intake manifold (1).
2.
Remove eight screws (11) from instrument cluster (10) and pull away from instrument panel (9).
3.
Loosen shaft nut (7) and disconnect speedometer driveshaft (6) from speedometer (8).
4.
Remove nut (15), screw (20), and clamps (19) and (14) from bracket (16) on engine bell
housing (18).
5.
Remove screw (17) and bracket (16) from engine bell housing (18).
6.
Remove clamp (19) from speedometer driveshaft (6).
7.
Remove screw (23) and clamp (22) from transfer case (21).
8.
Remove clamp (22) from speedometer driveshaft (6).
9.
Disconnect shaft nut (24) from transfer case input gear cover (25).
10.
Remove five tiedown straps (26) from speedometer driveshaft (6). Discard tiedown straps (26).
11.
Remove speedometer driveshaft (6) and grommet (13) from firewall (12).
12.
Remove grommet (13) from speedometer driveshaft (6).
3-258
