TM 9-2320-272-24-1
THIS TASK COVERS:
a. Radiator Inlet Hoses and Tube Removal
f.
Transmission Oil Cooler Hoses and Tubes
Installation
b. Thermostat Housing Hose, Radiator
g.
Radiator Outlet Hoses and Tee Installation
Bypass Tube, and Hose Removal
h.
Surge Tank Hose Installation
c. Surge Tank Hose Removal
i.
Thermostat Housing Hose, Radiator Bypass
d. Radiator Outlet Hoses and Tee Removal
e. Transmission Oil Cooler Hoses and
Tube, and Hose Installation
j.
Radiator Inlet Hoses and Tube Installation
Tube Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M939/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured TM 9-2320-272-10).
Right splash shield removed (TM 9-2320-272-10).
Two locknuts (Appendix D, Item 313)
Coolant drained (para. 3-53).
1.
Loosen two clamps (2) and remove radiator inlet hose (1) from radiator (3) and inlet tube (18).
2.
Loosen two clamps (17) and remove hose (8) from thermostat housing (16) and inlet tube (18).
3.
Remove two locknuts (4), screws (7), clamps (6), and inlet tube (18) from upper radiator bracket (5).
Discard locknuts (4).
1.
Loosen two clamps (14) and remove thermostat hose (15) from thermostat housing (16) and bypass
tube (9).
2.
Loosen clamp (10) and remove tube (9) from hose (11).
3.
Loosen clamp (12) and remove hose (11) from tee (13).
3-154
