TM 9-2320-260-34-2
15-84. CONTROL CENTER BOX MAINTENANCE (Contd)
1.
Install
two nipples (7) on control center box (1) with two nuts (8).
2.
Install
circuit breaker mounting base (9) in control center box (1) with two screws (10).
3.
Install
circuit breaker (4) on circuit breaker mounting base (9).
4.
Install
terminal board (2) in control center box (1) with four screws (11).
5.
Install
three wires (6) on circuit breaker (4) by tightening three screws (5).
6.
Install
three wires (6) on terminal board (2) with three screws (3).
1.
Install control center box (1) on van body (14) with four new lockwashers (13) and screws (12).
2.
Route wiring harnesses (16) and (15) through two nipples (7) in control center box (1).
3.
Install three wires (23) on circuit breaker (4) with three screws (21).
4.
Install three wires (17) on terminal board (2) with three screws (18).
5.
Install covers (22) and (20) on control center box (1) with eight screws (19).
15-318