TM 9-2320-260-20
13-44. TRACTOR WRECKER CONTROL VALVE REPLACEMENT (Contd)
NOTE
Perform steps 13 and 14 if new control valve is to be installed.
q
q Tag elbows and adapter elbows for installation.
Record angle positions of fittings for assembly.
13. Remove elbow (8) and adapter elbow (6) from control valve (2).
14. Remove six elbows (7) and two adapter elbows (9) from control valve (2).
NOTE
Perform steps 1,2, and 3 for installation of new control valve.
1. Wrap male threads of six elbows (7), two adapter elbows (9), elbow (8), and adapter elbow (6) with
antiseize tape.
2. Install six elbows (7) and two adapter elbows (9) on control valve (2) to angle positions previously
recorded.
NOTE
Elbow and adapter elbow must point to rear of control valve when
tightened.
3. Install elbow (8) and adapter elbow (6) on ends of control valve (2).
13-103