REAR WINCH CABLE TENSlONER VALVE REPLACEMENT

TM 9-2320-260-20

13-20. REAR WINCH CABLE TENSlONER VALVE REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M816

TM 9-2320-260-10

TM 9-2320-260-20P

MATERIALS/PARTS

EQUIPMENT CONDITION

Two lockwashers

Parking brake set (TM 9-2320-260-10).

Remove connector (4) from valve (1).

Remove connector (3) from elbow fitting (2).

Remove two screws (7), lockwashers (6), and valve (1) from bracket (5). Discard lockwashers (6).

4. Remove elbow fitting (2) from valve (1).

Install elbow fitting (2) on valve (1).

2. Install valve (1) on bracket (5) with two new lockwashers (6) and screws (7).

3. Install connector (3) on elbow fitting (2).

4. Install connector (4) on valve (1).

13-48