TM 9-2320-260-20
I
THIS TASK COVERS:
e. Frame Assembly
a. Companion Seat Backrest Removal
f. Companion Seat Installation
b. Companion Seat Cushion Removal
g. Companion Seat Cushion Installation
c. Companion Seat Removal
h. Companion Seat Backrest Installation
d. Frame Disassembly
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
All
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIAIS/PARTS
EQUIPMENT CONDITION
Six locknuts
Parking brake set (TM 9-2320-260-10).
Seven cotter pins
Remove backrest (1) from backrest frame (29).
I
b. Companion Seat Cushion Removal
1. Remove screw (4) and locknut (17) from link (15) and cushion (18). Discard locknut (17).
2. Remove cotter pin (25), washer (27), pin (28), and cushion (18) from frame (21). Discard cotter
pin (25).
1. Unlatch fastener (7) from backrest frame (29).
2. Remove four screw-assembled washers (20) and cushion frame (21) from cab floor (13).
1. Remove four cotter pins (3), washers (2), pins (6), and backrest frame (29) from link (5), link (26),
and cushion frame (21). Discard cotter pins (3).
2. Remove locknut (19), screw (24), two washers (22), sleeve (23), and link (26) from cushion frame (21).
Discard locknut (19).
3. Remove cotter pin (12), pin (16), and link (15) from cushion frame (21). Discard cotter pin (12).
4. Remove cotter pin (9), washer (8), and link (5) from cushion frame (21). Discard cotter pin (9).
5. Remove four locknuts (14), screws (10), and leg (11) from cushion frame (21). Discard locknuts (14).
11-58
