1-1. SCOPE. This volume shows you how
to do troubleshooting
at the direct support
level of maintenance. The amount of troubleshooting you can do is based on what the
Maintenance Allocation Chart says you can fix. Because of this, the only trouble
symptoms you will find here are those that could be caused by faulty things you can
. When you do PMCS, or when you drive the truck and find
that something is wrong, write down what is wrong. Then check the fault symptom
index to see if the trouble (fault symptom) you noted is in the index. If it is, you
can do troubleshooting to find the fault and fix it.
1-3. TROUBLESHOOTING APPROACH.
to find out what
is causing the
problem in the truck, you must use a good approach. A good approach just means a
way of doing troubleshooting so you can find the problem and not get confused or lost.
The following chapter describes how you can use the materials in this volume to
troubleshoot with a good approach.