TM 11-7440-293-14
4-81. REMOVING/lNSTALLING ELECTRONIC LINE PRINTER RACK.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Personnel Required
Tools
1/2-inch box wrench (2 required)
One mechanic
Equipment Condition
Materials/Parts
All power in vehicle off.
Electronic printer rack
4-inch ground straps removed.
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
See TM 11-7440-251-10 and TM 11-7440-253-10-1 for
removal of electronic line printer.
Screw (1), flat
Using two 1/2-inch box wrenches, remove.
1. Lower supports
There are four screws. Step 1 is
washers (2) and
of electronic
typical for all four screws.
nut (3)
line printer rack
Do step 1 again.
Screws (4)
2.
Using 1/2-inch box wrench, remove.
Screw (5), lock-
3. Curbside, vertical
washer (6) and
support
flat washer (7)
Using 1/2-inch box wrench, remove.
Screw (8), lock-
4. Roadside, vertical
washer (9) and
support
.
flat washer (10)
Remove.
Electronic line
5. Curbside, tacfire
For storage, put in cloth bag,
printer rack (11)
rack
attach to electronic line printer.
4-164