T M 11-7440-293-14
4-73. REMOVING 26-FOOT POWER CABLE.
This task covers:
Removal
INITIAL SETUP
.
Personnel Required
Tools
One mechanic
Flat-tip screwdriver
Materials/Parts
Equipment Condition
Power cable 26-feet long
See
faceplate and receptacle.
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
WARNING
All power in vehicle must be off.
Using flat-tip screwdriver, loosen.
1. Cable connector
Screws (1)
2.
Remove.
Power cable (2)
3. Forward wall
Using flat-tip screwdriver, remove.
Screw (3), flat
There are four cable clamps. Step
washer (4) and
3 is typical for all four cable
cable clamp (5)
clamps.
Do step 3 again.
4.
Cable clamps (6)
Remove.
5.
Nylon ties (7)
Using flat-tip screwdriver, remove.
Screw (8), flat
6. Ceiling, next to
forward wall
washer (9), cable
clamp (10) and
power cable (2)
NOTE
Do step 5 again for each cable clamp and hardware until
circuit breaker box is reached.
4-144