TM 11-7440-293-14
4-54. INSTALLATION OF POWER CABLE AND RECEPTACLE.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
Wire cutters
Wire strippers
Equipment Condition
Ruler
Flat-tip screwdriver
Outlet box installed.
Materials/Parts
Receptacle
Face plate
ACTION
REMARKS
ITEM
LOCATION
NOTE
Put power cable over outlet box. Measure from outlet box
down power cable 8 1/2 inches and cut.
Put power cable into cable clamp.
Power cable (1)
1. Outlet box
and cable
clamp (2)
Screws (3)
Using flat-tip screwdriver, tighten.
2. Cable clamp
Using wire strippers, strip 7 inches of outer
Outer
3. Power cable
insulation.
insulation (4)
Using wire strippers, strip 5/8 inch
Black wire (5),
4.
insulation from each wire.
white wire (6) and
green wire (7)
Receptacle (8) and
Using flat-tip screwdriver, install.
5. Face plate
screws (9)
Using flat-tip screwdriver, install.
Black wire (5) and
6 . Receptacle
terminal X (10)
4-102