TM 11-7440-293-14
4-52. 4 X 4-INCH OUTLET BOX.
Installation instructions for 4 x 4-inch outlet procedures listed below are given in this
section.
Installing 4 x 4-inch outlet box and cable connector
Installing power cable and receptacle
4-53. INSTALLING 4 X 4-INCH OUTLET BOX AND CABLE CONNECTOR
This task covers:
Installation
INITIAL SETUP
Tools
Personnel Required
One mechanic
Flat-tip screwdriver
Pliers
Equipment Condition
Materials/Parts
Power cable installed.
1-inch sheet metal screws (2 required)
4 x 4-inch outlet box
Conduit locknut
Cable connector
ACTION
ITEM
REMARKS
LOCATION
Knockout plug (1)
Using flat-tip screwdriver, remove.
1. Outlet box
2. Curbside, 24 inches
Outlet box (2) and
Using flat-tip screwdriver, install.
Hole on top.
screws (3)
down from recess
3. Knocked out plug
Cable connector
Using pliers, install.
hole on outlet
(4) and conduit
locknut (5)
box
4-100