TM 11-7440-293-14
4-46. INSTALLING ROADSIDE ANTENNA CABLES.
This task covers:
Installation
INITIAL SETUP
Tools
Personnel Required
Flat-tip
screwdriver
One mechanic
Materials/Parts
Equipment Condition
Cable clamps (3 required)
Antenna cable routed, mounting
1-inch sheet metal screws
holes predrilled.
(3 required)
Nylon tires (3 required)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Once cable is routed, secure in position pulling cable
tight.
1 . Roadside
Cable clamp (1),
Using flat-tip screwdriver, install.
screw (2) and
There are three cable clamps.
Step 1 is typical for all three
cable clamps.
2.
Cable clamps (4)
Do step 1 again.
3.
Nylon tie (5)
Install.
There are three nylon ties.
Secure antenna cables with nylon ties
where possible. Step 3 is typical
for all three nylon ties.
4.
Nylon ties (6)
Do step 3 again.
NOTE
For antenna cable connections refer to SB 11-131.
4-86