TM 11-7440-293-14
4-39. INSTALLING CURBSIDE ANTENNA MOUNT ASSEMBLY.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
9/16-inch box wrench (2 required)
Equipment Condition
Materials/Parts
Antenna mount assembly
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
Save all removed hardware for installation of antenna
mount.
1. Curbside fender
Using two 9/16 inch box wrenches, remove.
Screw (1), flat
There are four screws. Step 1 is
washers (2) and
typical for all four screws.
nut (3)
2.
Screws (4)
Do step 1 again.
INSTALLATION
NOTE
Make sure that cables are facing in toward truck and mounting
base does not crimp cables.
Put antenna mount on curbside fender and
1. Curbside fender
Antenna mount (5)
aline holes.
and curbside
fender (6)
4-72