CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
Wear safety goggles for eye protection against flying chips.
Using selected drill bit (1), drill head flange (2) from RIVNUT (3). Knock out remaining portion of RIVNUT.
Installing Threaded RIVNUT's
Always apply anti-seize lubricant to bolt and screw threads before
installation to prevent galling.
During the installation of threaded RIVNUT's, the threads inside the
threaded RIVNUT can sometimes be damaged by the installation tool,
and may result in the bolts and screws binding. If this occurs, run a tap of
the RIVNUT thread size through the threaded area. This will clear and
straighten the threads, making for easier and faster assembly. Care
should be taken using this method since the tap has the ability to remove
and/or cross thread existing threads. Be sure to work slowly and
deliberately when clearing the threads.
Install the threaded RIVNUT using the appropriate hand operated header (threaded RIVNUT installation
tool) (1), hex (allen) wrench (2) (included with installation tool), and 3/4 inch (or 1-1/16 inch depending on
header tool used) wrench (9) (adjustable, fixed, or box end ratchet type).