CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
THIS SECTION COVERS:
Personnel Required: One
Maintenance Level - Unit
Tools and Special Tools
This procedure contains information and instructions to keep the CBC safe and in good working order by
inspecting and replacing the air filter as required.
Inspect the condition of the air filter (1) to ensure that it is not dirty, clogged, or damaged in such a way as
to impair the free flow of air into the CBC.
To clean the air filter (1) reach up under the ventilator port opening (2) and grasp the air filter material with
Pull the air filter (1) straight down while moving from left to right.
Continue until the filter (1) has been completely removed from the ventilator port (2).
Wash the air filter material in clean, mildly soapy water until clean.
Allow the air filter to dry before replacing it in the ventilator.
If the air filter is very dirty and cannot be cleaned satisfactorily, replace it with a new filter.
Remove old air filter (1) as instructed above.
Replace with a new air filter by feeding one end of the filter up under the ventilator port (2) and pushing
upwards. Be sure that the filter remains straight and does not fold while being pushed into position.
Continue to push the air filter up into the ventilator port until the entire air filter is securely in place.