CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
UPPER ROOF ACCESS STEP
THIS SECTION COVERS:
Personnel Required: One
Maintenance Level - Unit
Tools and Special Tools
If replacing the lower roof access step, refer to WP 0033 for maintenance
To replace either of the two upper roof access steps (1), remove the two hex head bolts (2) of the roof
access step being replaced.
Loosen and remove the hex head bolts (2), and lock washers (3).
Remove the defective roof access step (1).
Install a new roof access step (1) into position on the side wall of the CBC.
Align the holes on the roof access step with the holes on the side wall of the CBC.
Install the two lock washers (3) followed by the two hex head bolts (2) through the roof access step and
into the threaded inserts (4) permanently installed in the side wall of the CBC.
Tighten both bolts securely.