CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
ROOF ACCESS HANDHOLD
THIS SECTION COVERS:
Inspect, Remove, Replace
Personnel Required: One
Maintenance Level - Unit
Tools and Special Tools
This procedure contains information and instructions to keep the CBC safe and in good working order by
inspecting and replacing the roof access handhold.
Inspect the rubber gripping surface of the roof access handhold and ensure that there are no surfaces
that could cut or otherwise injure a user's hand.
To remove the roof access handhold (1) remove the four screws (2), lockwashers (3), and flat washers (4)
that secure the handhold (1) to the roof of the Cargo Bed Cover. Note that there is no hardware installed
in the center hole (5) of the roof access handhold (1).
Remove the defective handhold from the roof of the CBC.
Install a new handhold (1) in the same orientation as the original.
Install screws (2), lockwashers (3), and flat washers (4) in four locations to secure the new handhold to
the roof of the CBC.