CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
Proceed with the coating and rinsing until the entire surface is coated with alodine.
Rinse. Before the alodine solution dries, wipe it from the surface with a clean cloth or sponge wet with
clean water. The alodine solution may also be rinsed from the surface with clean water from a hose.
Dry. After the rinsing has been finished, allow the work to air dry. Drying can be speeded by wiping with
clean, dry rags. Clean, dry, compressed air should be used to blow moisture from joints, depressions,
etc., and to speed the drying. When the surface is entirely dry, the part is ready for service without further
treatment, or if desired, it may be painted in accordance with manufacturer's directions.
END OF WORK PACKAGE